Wiring Forum
http://wiring.org.co/cgi-bin/yabb/YaBB.pl
Wiring Hardware >> How to get it? >> My own wiring mini clone
http://wiring.org.co/cgi-bin/yabb/YaBB.pl?num=1241529887

Message started by Starfire on 05/05/09 at 13:24:47

Title: My own wiring mini clone
Post by Starfire on 05/05/09 at 13:24:47
So here is a youtube video of my own wiring mini clone but I've added a couple things.

1.  Fully compatible with wiring
2.  On board USB
3.  Standard breadboard layout (Leave a row on each side open of    
    breadboard)
4.  Fully regulated power supply (6 to 15V)
5.  Dedicated VCC and GND pins.
6.  Power, TX, RX, and Pin 48 LEDs
7.  1"x3.1" (Small)
8.  ISP header

Link: http://www.youtube.com/watch?v=e9688gCgzdI&feature=channel_page

Title: Re: My own wiring mini clone
Post by Titus on 05/05/09 at 16:46:03
Well done!
Very cool
And no need for a usb adapter!

Title: Re: My own wiring mini clone
Post by Starfire on 05/05/09 at 20:04:21
Thanks!  Also I wanted to keep it as much through hole as possible.  I'll probably add it to seeedstudio's open source site.  I still can't figure out why this is as popular as the arduino, just now does the arduino have a version that offers the same I/O.

Title: Re: My own wiring mini clone
Post by barragan on 05/06/09 at 15:38:14
hey, do you have a site for it?


Title: Re: My own wiring mini clone
Post by Starfire on 05/08/09 at 14:48:15
I have it on my blog at:

http://starfiretech.wordpress.com/2009/05/05/a-side-project-of-mine/

and also

a youtube video: http://www.youtube.com/watch?v=e9688gCgzdI

Title: Re: My own wiring mini clone
Post by barragan on 05/08/09 at 16:34:18
cool, I'll add it to the hardware section in the next site update. Thanks for the good work :)

Title: Re: My own wiring mini clone
Post by barragan on 11/12/09 at 06:52:11
what happened with your board? is it already working?
best, h.

Wiring Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.