Wiring Forum
Wiring Hardware >> Troubleshooting >> Interrupt Function

Message started by jdwang on 11/19/08 at 00:52:24

Title: Interrupt Function
Post by jdwang on 11/19/08 at 00:52:24

I am using attachInterrupt() function to detect a output of a IR sensor. I also have two different programs to run the test. With one of them, I can only detect the interrupt on pin 0 and 1 but not 2,3,36~39. And with another program, nothing can be detected on all the pins.

Another weied thing happened. When I used pin 36 and 37 to detect the interrupt, the voltage on these pins is 0.

Does anyone had similiar program or knows the possible solution?


Title: Re: Interrupt Function
Post by Vaccumdiode2 on 11/19/08 at 16:54:14
Please post your programs

Title: Re: Interrupt Function
Post by barragan on 11/19/08 at 19:42:12
check also this: http://wiring.org.co/cgi-bin/yabb/YaBB.pl?num=1227056335

Wiring Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.