Wiring Forum
http://wiring.org.co/cgi-bin/yabb/YaBB.pl
Suggestions >> Software Suggestions >> Wiring Timeout During Reset
http://wiring.org.co/cgi-bin/yabb/YaBB.pl?num=1218151026

Message started by ajcheema on 08/07/08 at 23:17:06

Title: Wiring Timeout During Reset
Post by ajcheema on 08/07/08 at 23:17:06
Hello,

I was wondering if it was possible to change the programming time when the RESET button is pressed on the wiring board without changing the boot-loader.

AJ

Title: Re: Wiring Timeout During Reset
Post by Titus on 08/08/08 at 08:31:16
You mean the time it takes for wiring to start running the program after the reset button is pressed,

like set it to 0 seconds or 1 or so?
That's something I would like to :P

Title: Re: Wiring Timeout During Reset
Post by barragan on 08/08/08 at 16:02:16
The waiting time before starting a program is part of the bootloader program, so you will need to change the bootloader in order to remove it or change it and re-program the modified bootloader in your board using an AVRISP or similar ISP dongle to do it (the ISP connector in the board is used for that). Please check the bootloader source code here: http://wiring.uniandes.edu.co/source/trunk/wiring/bootloader/

Wiring Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.